D-LFO
MULTI FUNCTION DUAL LFO
The D-LFO consists of two identical low frequency oscillators. The LFO2 can be internally sync-ed to LFO1 by an internal switch. The TRIP POINT control the voltage point at which the waveform is sync-ed; continuously from lowest to highest point of the waveform. Additionally the external signal can be used as sync source in two modes; the SYNC T converts the external signal to a very narrow pulse for a distinct sync and the SYNC G extract pulse width of the external signal for sync with a "steady state" sync-ed waveform. The RM/AM is a ring modulator / amplitude modulator. It is coupled to both LFO's outputs and has a separate output "RM-AM" and input for external signal (pre-patched to the LFO2's output).
Total frequency range 100 sec to 0.2msec
RATE1,2 20 sec to 20msec
WAFEFORMS 7 basic waveforms incl. 3 S/H
RATE CV leveled 0 to 1 Volt/octave
INTERNALS SYNC
TRIP POINT 0 to 95% of waveforms amplutude
RM/AM RM/AM mode switch
SYNC T accepts any wave shape,s 2 Volts
treshold, 20 sec pulse width
SYNC G accepts any wave shapes, 2 Volts
treshold, any pulse width
Current consumption 75mA
Dimensions 28.4mm ( H) / 70.6 mm ( B)
2 HE, 12 TE